Adjustment
94
12.14 Hardware-Test
The hardware test is a test program, with which it is possible, with the aid of the control pa-
nel, to check various components of the control unit and the machine installation. The test is
carried out by scanning fi ve test blocks.
12.14.01 Carry out the hardware test
Switch on the machine.
Activate service level "C", see Chapter 12.12.01 Selecting the user level.
Select parameter"797" and set it at "ON" by pressing the appropriate +/- key. Test block 1
appears on the display.
The other test blocks can be called up by pressing the +/- key A.
●
●
●
●
12.14.02 Test block 1 – inputs
The current input is displayed with the +/- key B.
Press the +/- key B to display the other inputs.
●
E 6 0 X5: 11
Input
Input number
Connector
Input status
0 = switch open, 1 = switch closed
Contact number
To Next Page
Loading...
Need help?
General
