Sewing
34
10 Sewing
The machine may only be operated by appropriately trained personnel! The ope-
rating personnel must ensure that only authorised persons are in the danger
area of the machine!
In addition to the input mode, in particular for production the sewing mode is available. De-
pending on the program selected and the machine status, in the sewing mode all sewing
data relevant for the production is shown on the display. Standard operation is in the pro-
grammed sewing mode. It is possible to switch to the manual sewing mode to install and
check operating sequences.
For sewing the following conditions must be fulfi lled:
All safety devices must be fi tted, see Chapter 1.06 Danger warnings.
The machine must be properly installed and commissioned in accordance with Chapter
8 Installation and Commissioning.
All setting-up work must have been completed, see Chapter 9 Setting up.
●
●
●
To Next Page
Loading...
Need help?
General
