Pfaff 3511-2/01 - Copying Individual Programs to Machine Memory

Sewing
48
10.04.06 Copying individual programs to the machine memory
Call up the program management, see Chapter 10.04.01 Calling up the program
management.
●
Press the +/- keys (A) until the appropriate menu item appears.
Confi rm the selection of the menu item by pressing "+" on the +/- keys (L).
●
●
Press the +/- keys (P) to select the programs, which are to be copied from the
SD-memory card to the machine memory (programs 1 - 99).
Press the +/- keys (D) to select the program number to be stored in the machine
memory.
Confi rm the copying process by pressing "+" on the +/- keys (L).
Press +/- keys (A) to call up the other menu items of the program management.
●
●
●
●
COPY
COPY 1 2