Pfaff 3511-2/01 - Copying Individual Programs to SD Card

Sewing
46
10.04.04 Copying individual programs to the SD-memory card
Call up the program management, see Chapter 10.04.01 Calling up the program
management.
●
Press the +/- keys (A) until the appropriate menu item appears.
Confi rm the selection of the menu item by pressing "+" on the +/- keys (L).
●
●
Press the +/- keys (D) to select the programs, which are to be copied from the machine
memory to the SD-memory card (programs 1 - 99).
Press the +/- keys (P) to select the program number to be stored on the SD-memory
card.
Confi rm the copying process by pressing "+" on the +/- keys (L).
Press +/- keys (A) to call up the other menu items of the program management.
Non-assigned (active) program numbers are marked with a "?".
●
●
●
●
COPY
COPY 2 1