Input
11 - 11
● Change to input of second seam section.
In the first seam section
- the graduation value should be "3.5",
- the roller presser should work with a feed stroke (stitch length) of 3.0 mm and
- the thread tension should be "+5".
● Select the value 3.0 for the feed stroke (stitch length) of the roller presser.
● Select the graduation value "3.5".
● Set the thread tension at "+5".
● Sew the first seam section with the pedal function.
3.0
3.5
+52.6
3.5
2.4
5
11
1
+52.6
3.5
2.4
5
11
1
156
+5
+52.7
0.0
2.4
5
11
2
To Next Page
Loading...
