Input
11 - 12
In the second seam section
- the graduation value should be "0",
- the roller presser should work with a feed stroke (stitch length) of 2.7 mm and
- the thread tension should be "+5".
● Select the value 2.7 for the feed stroke (stitch length) of the roller presser.
● Select the graduation value "0.0".
● Set the thread tension at "+5".
● Sew the second seam section with the pedal function.
2.7
0.0
● Activate the "end of seam" function.
+52.7
0.0
2.45
11
2
132
● By operating the pedal, carry out the thread trimming function, see Chapter 7.03 Pedal.
The machine changes to the input of the second sleeve seam:
2.4
5
1
48
3.5
2
+52.7
1
+5
+52.8
3.5
2.4
5
21
1
To Next Page
Loading...
