Pfaff 3834-14/11 - Page 61

Input
11 - 13
● Change to input of second seam section.
In the first seam section
- the graduation value should be "3.5",
- the roller presser should work with a feed stroke (stitch length) of 2.8 mm and
- the thread tension should be "+5".
● Select the value 2.8 for the feed stroke (stitch length) of the roller presser.
● Select the graduation value "3.5".
● Set the thread tension at "+5".
● Sew the first seam section with the pedal function.
2.8
3.5
In the second seam section
- the graduation value should be "0",
- the roller presser should work with a feed stroke (stitch length) of 2.9 mm and
- the thread tension should be "+5".
● Select the value 2.9 for the feed stroke (stitch length) of the roller presser.
● Select the graduation value "0.0".
● Set the thread tension at "+5".
2.9
0.0
+5
+5
+52.9
0.0
2.4
5
21
2
+5
2.8
3.5
2.45
21
1
136