Pfaff 5483 - Page 55

45.2 Checking the proper working of the reverse sewing mechanism
45.0.4
45.2.1 Thread the machine, place a piece of fabric under the presser foot and lower
the presser foot.
45.2.2 Depress the reverse-feed control, turn the balance wheel In sewing direction
and watch spreader 4.
45.2.3 The spreader should reliably pick up the rear leg of the needle thread loop and
the looper thread only, as seen In feed direction (see Fig. 45.0.4.).
45.2.4 If readjustment is required, repeat the adjustments described on page 52.
53
From the library of: Superior Sewing Machine & Supply LLC