Pfaff P45 PD 2-L User Manual

Input P74 ED
60
Group Parameter Description User level Setting range Set value
7
789 Needle position 10 (bearing position) B 0 - 255 225
793 Delay for feed adjustment on during
trimming with shortened trim stitch [ms)
B 0 - 2000 140
797 Hardware test
OFF = off, ON = on
C ON - OFF OFF
798 User level
0 = user level A
1 = mechanic level B
11 = service level C
A 0 - 20 1
799* Selected machine class C 1 - 4
2235, 2545/46-900/81 1
2545-900/82 2
2542 3
2595/96 4
800* Motor rotating direction when looking at V-belt
pulley
1= anti-clockwise, 0 = clockwise
C 0 - 1 1
8
801 Reversing angle at end of seam B 10 - 200 30
802* Speed reduction main drive
1 = variable,
0 = 1:1
C 0 - 1 1
814 Change-over of positioning method
1 = Ramp braking in target position
2 = Max. braking at positioning speed and
wait till target position is reached.
C 1 - 2 2
815 Determine rotor position after mains On.
1 = using rotary fi eld, 2 = using current pulses
C 1 - 2 1
880 Max. starting current [A] C 1 - 20 10
881 Adjust positioning behaviour of motor to the
machine to avoid vibrations
C 10 - 1000 250
* = These parameters remain unchanged when the set parameter values are reset, see
Chapter 10.01.02 Resetting the set parameter values.

Pfaff P45 PD 2-L Specifications

General

Brand	Pfaff
Model	P45 PD 2-L
Category	Sewing Machine Accessories
Language	English