P74 ED Input
61
Group
Parameter
Description
User level
Setting range
Set value
8
884 Proportional amplifi cation of speed control of
sewing motor
2235, 2542, 2545/46-900/81, 2545-900/82 B 3 - 24 18
2595/96 B 3 - 24 10
885 Integral amplifi cation of speed control of sew-
ing motor
C 10 - 80 40
886 Proportional amplifi cation of positioning con-
troller (sewing motor)
C 1 - 30 24
887 Differential amplifi cation of positioning control-
ler (sewing motor)
2235, 2542, 2545/46-900/81, 2545-900/82 C 1 - 20 10
2595/96 C 1 - 20 4
889 Time for positioning control in [ms],
0 = always
C 0 - 2500 200
890 Proportional amplifi cation of stop brake C 1 - 10 5
897* MINI-motor variant
1 = long, 0 = short
C 0 - 1 1
898 Motor current limitation
ON = 15A, OFF = 10A
C ON - OFF ON
9 900 Proportional amplifi cation of speed controller
during trimming
B 1 - 30 18
901 Trimming release-speed B 30 - 500 300
933 Switchover of display on screen
>1 = diagnosis display
0 = standard display
C 0 - 3 0
939 Hold-back time (premature electrical switcho-
ver) for feed adjustment when switching on
[ms]
B 10 - 200 30
968 Hold-back time (premature electrical switcho-
ver) for feed adjustment when switching off
[ms]
B 10 - 200 42
* = These parameters remain unchanged when the set parameter values are reset, see
Chapter 10.01.02 Resetting the set parameter values.
To Next Page
Loading...
Need help?
General