The camera refers to motion detection as an“alarm”. If any alarm occurs, the
camera can trigger a recording and send an email.
Press on to enter the Alarm Recording settings or Alarm Email settings.
In the Alarm Recording settings, you can
turn on or off the Alarm Recording
feature.You can select which
stream
profile to record.
The video can be recorded into many split files for better management[File Split]
and index. You can set the recording time for each split file.
Alarm Actions
Alarm Email
Alarm Recording
Alarm Recording
OFF
Alarm Recording
Record Stream
Post-Recording
File Split (sec)
1st
30
60
PHYLINK Covert Network Camera User Manual
Alarm Actions
Alarm Recording
[ ] The number of seconds that the camera should keep recordingPost-Recording
video after motion stops. If there is any motion within this time the camera will keep
recording until there is no motion for the duration of this parameter. It can be from
5 seconds to 24 hours.
To Next Page
Loading...
