If it says “Updating” or Unavailable” you should double check your account
settings. No-IP.com uses your complete email address as user name, and the
password required in this menu is the one you created during No-IP account setup.
If successful the camera will show you the complete external URL for your reference.
After you enter your account and hostname information you can go to the camera’s
“ ”menu at the top of the and scroll down to the DDNSSystem Settings screen
section to see if it worked.
DDNS
Success
Status:
External IP addess:
183.48.162.134
Host name:
phylinkipcamera.sevehttp.com
PHYLINK Covert Network Camera User Manual
To Next Page
Loading...
