PHYLINK Covert Network Camera User Manual
[ ] If this option is empty, it may prevent your camera fromDNS Servers
sending email alerts. Enter the DNS in the TCP/IP menu if needed.
[ ] If you do not have a static IP address, a DDNS service helps youDNSS
access your camera easily from outside your network.
This confirms the DDNS is active or not.
[ ] If your router has UPNP and it has successfully worked with yourUPNP
camera, this will tell you here. This saves you forwarding any ports.
[ ] This is the external address and Port of the camera.Internet URL
[ ] Lets you know if storage is available on SD card or NAS drive.Storage
DNS Server
192.168.1.1
Primary DNS IP address:
Status:
Host name:
phycam.noip.me
External IP address:
183.17.94.97
Status:
DDNS
Success
UPNP port forwarding
Success
Gataway external IP address:
183.17.94.97
Gataway external Port:
8150
Internet URL:
http://phycam.noip.me:8150
Status:
Storage
Not ready
Store to:
SD card
To Next Page
Loading...
