Pioneer PDP-5000EX

PDP-5000EX
120
1234
1234
C
D
F
A
B
E
8.1.5 CONFIGURATION OF FACTORY MODE
Configuration of Factory Mode
Uppermost Layer Item
Variable / Adjustment Range Remarks
Middle Layer Item
Lower Nested Layer Item
8.2.1 INFORMATION
8.2.1.1 VERSION (1)
8.2.1.2 MAIN NG CLEAR <=> NO <=> YES
8.2.1.3 TEMPERATURE
8.2.1.4 HOUR METER
8.2.1.5 HDMI SIGNAL INFO 1 and 2
8.2.1.6 VDEC SIGNAL INFO
8.2.2 PANEL FACTORY (+)
8.2.2.1 PANEL INFORMATION
8.2.2.2 PANEL WORKS
8.2.2.3 POWER DOWN
8.2.2.4 SHUT DOWN
8.2.2.5 PANEL-1 ADJ (+) X-SUS B <=> 120 to 136 Equivalent to XSB
Y-SUS B <=> 120 to 136 Equivalent to YSB
Y-SUSTAIL T1 <=> 120 to 136 Equivalent to YTG
Y-SUSTAIL T2 <=> 120 to 136 Equivalent to YTB
Y-SUSTAIL W <=> 120 to 136 Equivalent to YTW
XY-RST W1 <=> 120 to 136 Equivalent to RSW
XY-RST W2 <=> 120 to 136 Equivalent to RYW
VOL SUS <=> 000 to 255 Equivalent to VSU
VOL OFFSET <=> 000 to 255 Equivalent to VOF
VOL RST P <=> 000 to 255 Equivalent to VRP
SUS FREQ. <=> MODE 1 to MODE 8 Equivalent to SFR
8.2.2.6 PANEL-2 ADJ (+) R-HIGH <=> 000 to 511 Equivalent to PRH
G-HIGH <=> 000 to 511 Equivalent to PGH
B-HIGH <=> 000 to 511 Equivalent to PBH
R-LOW <=> 000 to 999 Equivalent to PRL
G-LOW <=> 000 to 999 Equivalent to PGL
B-LOW <=> 000 to 999 Equivalent to PBL
ABL <=> 000 to 255 Equivalent to ABL
8.2.2.7 PANEL REVISE (+) R-LEVEL <=> LV-0 to LV-7 Equivalent to RRL
G-LEVEL <=> LV-0 to LV-7 Equivalent to RGL
B-LEVEL <=> LV-0 to LV-7 Equivalent to RBL
8.2.2.8 ETC. (+) BACKUP DATA <=> NO OPRT <=> TRANSFER or ERR Equivalent to BCP
DIGITAL EEPROM <=> NO OPRT <=> DELETE/REPAIR Equivalent to FAJ/UAJ
PD INFO. <=> NO OPRT <=> CLEAR Equivalent to CPD
SD INFO. <=> NO OPRT <=> CLEAR Equivalent to CSD
HR-MTR INFO. <=> NO OPRT <=> CLEAR Equivalent to CHM
PM/B1-B5 <=> NO OPRT <=> CLEAR Equivalent to CPM
P COUNT INFO. <=> NO OPRT <=> CLEAR
R MASK LEVEL <=> 000 to 255
G MASK LEVEL <=> 000 to 255
B MASK LEVEL <=> 000 to 255
Equivalent to CPC
MAX TEMP. <=> NO OPRT <=> CLEAR Equivalent to CMT
8.2.2.9 RASTER MASK SETUP (+) MASK OFF Equivalent to MKS+S00
RST MASK 01 <=> <=> 48V <=> 50V <=> 60V <=>
60P <=> 70P <=> 72P <=> 75V <=>
<=> 48V <=> 50V <=> 60V <=>
60P <=> 70P <=> 72P <=> 75V <=>
<=> 48V <=> 50V <=> 60V <=>
60P <=> 70P <=> 72P <=> 75V <=>
Equivalent to MKS+S51
• • • • • •
RST MASK 24 <=> Equivalent to MKS+S74
8.2.2.10 PATTEN MASK SETUP (+) MASK OFF Equivalent to MKS+S00
PTN MASK 01 <=> Equivalent to MKS+S01
• • • • • •
PTN MASK 39 <=> Equivalent to MKS+S10
8.2.2.11 COMBI MASK SETUP (+) MASK OFF Equivalent to MKC+S00
CMB MASK 01 <=> Equivalent to MKC+S01
• • • • • •
CMB MASK 10 <=> Equivalent to MKC+S10
8.2.3 INITIALIZE
8.2.3.1 SYNC DET (+) for the technical use
8.2.3.2 SG MODE SG OFF <=> • • •
SG PATTERN <=> COLOR BAR 1 • • •8.2.3.3 SG PATTERN
8.2.3.4 SIDE MASK LEVEL (+)
8.2.3.5 FINAL SETUP (+) DATA RESET <=> OFF <=> JP ON <=> US ON <=> EU ON
8.2.3.6 HDMI INTR POSITION (+) INTR-POS1 (0x75) <=> 001 for the technical use
Not available.
Changing of the SIDE
MASK LEVEL is possible
in Integrator mode.