124
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
cable, change the audio output of the AV component to the PCM output.
• When video and audio via HDMI input are output to ZONE 2, set "Input/Output
Assign" - "TV Out / OSD" - "Zone 2 HDMI" ( p153) to "Use" on the System
Setup menu.
• DSD audio signals cannot be output to ZONE 2 when selected with the "NET"
or "USB" input selector.
• If ZONE 2 is on, power consumption during standby will increase.
To set the function to off: While pressing and holding ZONE 2 button, press
.
Alternatively, press the ZONE 2 ON/OFF button on the main unit.
Playing Back (ZONE 3) ( p125)
To Next Page
Loading...
