150
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Source Input Volume Absorber Adjust the volume level when there are differences in volume level among multiple devices
connected to this unit.
p165
Name Edit Set an easy name for each input.
p165
Audio Select Select the priority for input selection when multiple audio sources are connected to one input
selector.
p166
Hardware HDMI Change the settings for the HDMI functions.
p167
Power Management Change the settings for the power-save function.
p168
12V Trigger A Change the settings for 12V TRIGGER OUT A port.
p169
12V Trigger B Change the settings for 12V TRIGGER OUT B port.
p171
Works with SONOS Change the settings to connect with the Sonos Connect.
p173
Multi Zone Zone 2 Change the settings for Zone 2.
p174
Zone 3 Change the settings for Zone 3.
p175
Remote Play Zone Change the settings for remote play.
p175
Miscellaneous Tuner Change the frequency step for the tuner.
p176
Remote ID Change the remote controller ID.
p176
Preamp Mode If this unit is connected to a power amplier, you can reduce the power consumed by turning off the
power supplied to the SPEAKERS jacks on this unit.
p177
Firmware Update Change the settings for Firmware Update.
p177
Initial Setup Make the initial setup from the setup menu.
p177
Lock Lock the Setup menu so that the settings cannot be changed.
p177
Factory Reset All the settings are restored to factory defaults.
p178
To Next Page
Loading...
Need help?
General
