INSTALLING THE PATIENT CHAIR
136 Planmeca Sovereign
Installation manual
12.3 Attaching the upholsteries
12.3.1 Headrest upholstery
Drive the headrest to the position where you can reach the attachment screws. Switch off the
dental unit. Place the headrest upholstery to the headrest assembly and tighten the screws at
the back of the headrest assembly.
12.3.2 Backrest upholsteries
The backrest upholsteries are attached to the backrest casting with attachment pins.
Press the backrest upholsteries to their positions so that the attachment pins go into the
openings on the upholstery.
Attachment pin
To Next Page