Planmeca Sovereign - Attaching Rotating Tray to the HT Instrument Console

INSTALLING THE PYLON AND ARM ACCESSORIES
90 Planmeca Sovereign
Installation manual
9.2 Attaching rotating tray to the HT instrument console
To attach the tray table, push the tray mounting arm into the attachment opening in a position
where the tray mounting arm is rotated approx. 30° backward as shown in the figure (1).
Attach the tray mounting arm to the instrument console by rotating the tray mounting arm
counterclockwise (when the tray table is placed on the left side of the console) or clockwise
(when the tray table is placed on the right side of the console) (2).
1
2
S202.eps