OPERATIONS PRIOR TO THE CUSPIDOR ATTACHMENT
16 Planmeca Sovereign
Installation manual
5.1 Using the support for floor tubing
Arrange the dental unit tubes and cables coming from the floor (1). Position the support plate
over the tubes/cables so that the tubes/cables are routed through the holes of the support
plate assembly (2). Place the plywood template assembly over the tube support (3). Make
sure that the wood blocks that shows the security area do not hit the tubes/cables (4). Attach
the plywood assembly to the support plate screws with attachment nuts (5).
1
60mm
2
3
5
4
4
4
S216.eps
To Next Page