Pogo Automatic - Performing a Blood Glucose Test; Initiating the Test Procedure

34
Customer Support 1-855-IMI-POGO (464-7646) • www.presspogo.com
Testing
• TURN
ON METER by pressing and
releasing the power button.
• Aer a screen check, the meter will
prompt you when ready for testing.
Power
Button
Test in
OFF
position
Test open
Ready to Test
IMPORTANT: DO NOT PLACE FINGER ON TEST
PORT until meter signals ready to test. It may
stop cartridge from rotating or cause meter
malfunction or damage. If this occurs, a
CC
may
appear (See Troubleshooting on page 75).
NOTE: Once meter is on and test is opened, if
you get distracted and do not lance within ve
minutes, the cartridge will rotate to OFF position.
Simply turn meter on to restart with new test.
TEST
YOUR
BLOOD