Pogo Automatic - Disinfecting the POGO Automatic Meter; Disinfecting Meter Exterior Surfaces; Disinfecting Meter Interior Parts

Test Opener
Barcode
Reader
Cartridge Tower
68
Customer Support 1-855-IMI-POGO (464-7646) • www.presspogo.com
Be sure to disinfect all
exterior meter surfaces,
including buttons and
grooves
Cartridge Area
Disinfecting Meter Exterior AFTER
EVERY CARTRIDGE or WEEKLY
(whichever comes rst)
Immediately following cleaning, use a
NEW Clorox Germicidal Wipe to disinfect
ALL external meter surfaces.
• Pay special attention to thoroughly wipe
gaps, grooves, and around buttons in
meter case.
• Allow the exterior surface to remain
damp for one minute, then let air dry.
Disinfecting Meter Interior
Aer testing, you should check inside of
your meter for blood, including cartridge
door. Clean and disinfect IMMEDIATELY
if blood is present. Any interior part you
cleaned needs to be disinfected, using a
NEW Clorox Germicidal Wipe. Be sure to
disinfect AFTER EVERY CARTRIDGE OR
WEEKLY, whichever comes rst.
(To clean, see Cleaning Meter on page 66).
CAUTION: Do not substitute other household cleaners
(e.g. Windex
®
, Lysol
®
or alcohol) for Clorox
®
Germicidal Wipes
®
to ensure
proper disinfection and to avoid meter damage or malfunction. Other
products, such as Clorox
®
Disinfecting
®
Wipes, have not been tested and
should not be used.
CARING
FOR
YOUR
POGO
AUTOMATIC