EasyManua.ls Logo

Pogo Automatic - Testing Your Blood Glucose; Overview of the Testing Process; Blood Sample Requirements

Pogo Automatic
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
Customer Support 1-855-IMI-POGO (464-7646) • www.presspogo.com
Meter needs only .25
microliters
of blood
The POGO
Automatic System is a new
way of testing. POGO Automatic has
All-Automatic
technology which means
lancing and blood collection are combined
in one easy step. Just place your nger
on the test port and press. The meter
automatically lances your nger and
collects your blood sample without the
need for separate supplies.
It’s that simple.
IMPORTANT: Press and hold your nger on the test port until the meter
beeps and arrow appears. This indicates that the meter has successfully
collected enough blood. Performing this step properly will help to ensure
you get a glucose result when you test.
Testing Your Blood Glucose
Wash hands
If this is your rst time testing, it is recommended that you practice
rst (see Practice on page 32).
Testing with POGO Automatic requires
a very small blood sample sizeonly .25
microliters. This is about the size of a
pinhead.
To prepare for testing, wash hands with
soap and water and dry thoroughly. Use of
warm water stimulates blood ow. If you
also choose to use alcohol to clean your
nger, make sure you let it dry. It is also a
good idea to wash your hands any time
aer you remove the test platform or open
the cartridge door to handle or change
cartridges.
TEST
YOUR
BLOOD

Table of Contents

Other manuals for Pogo Automatic

Related product manuals