Pogo Automatic - Time and Date Settings; Setting the Correct Time and Date

55
Customer Support 1-855-IMI-POGO (464-7646) • www.presspogo.com
Time/Date Settings
Select the Time/Date Settings from the
Main Set-Up Menu (see page 54).
Time/Date
You should always set the time and date
so test results can be recorded with the
correct information and averages can be
correctly calculated.
• To change the time, make sure the
blinking selection arrow is next to the
clock symbol and press
M
to select.
• Use the scroll buttons to adjust the
time setting and press
M
to conrm.
Month/Day/Year (12-hour mode)
• In the Time/Date Settings Menu, use the
scroll buttons to move the blinking
arrow to the Month/Day/Year Setting.
Press
M
button to select.
• The month will ash. Use the scroll
buttons to select the correct month.
Press the
M
button to conrm setting
and move to day of month.
• Use the same steps to change the day of
the month and year.
• To complete Month/Day/Year Settings,
press the
M
button.
Auto-Time
Symbol
When this symbol is
shown, the meter will
automatically adjust
to the correct time on
your smartphone (see
page 59)
2:15 PM
5/1/2020
m/d/yyyy
12h
12
24
ON
2:15 PM
12h
12
24
ON
5/1/2020
m/d/yyyy
SETTING
UP
METER