Pogo Automatic - Performing Test Assistance; Finger Placement and Pressure for Assistance

HOLD FINGER DOWN
OK TO REMOVE
42
Customer Support 1-855-IMI-POGO (464-7646) • www.presspogo.com
Blood Collection
Perform Test
Position patient’s nger on test port.
Seal the test port: Completely cover
the test port. Create a seal over the port
hole with patient’s ngertip. Avoid nger
positions that allow air to leak through the
port opening. KEEP THE PORT SEALED
DURING THE ENTIRE BLOOD COLLECTION
PROCESS.
Apply consistent pressure: Press down
until you see the 3-2-1 countdown. Keep
holding patient’s nger down until you see
the symbol, which means enough blood
has been automatically collected.
Watch the Screen
During automatic blood collection, you
can squeeze ngertip to increase blood
ow while holding nger in place. Gently
squeeze nger tip in downward motion to
help with circulation.
TEST
YOUR
BLOOD