Polaris GENERAL 2016 - Page 374

8.14
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
4. Install the new pinch bolt (PN 7520943) retaining the
upper steering shaft to the power steering unit.
Torque to specification.
TORQUE
Silver 10.9 Upper Steering Shaft Pinch Bolt:
30 lb-ft (41 Nm)
NOTICE
The upper steering shaft pinch bolt must be replaced
with PN 7520943 which has a silver finish and is 10.9
grade. Reference Figure 1.
5. Install the fasteners retaining the black plastic cover
and torque to specification.
TORQUE
Power Steering Unit Cover Fasteners:
7 lb-ft (10 Nm)
6. Turn the key switch on and test EPAS operation.
STEERING / SUSPENSION