EasyManua.ls Logo

Polaris GENERAL 2016 - Cooling System Hoses

Polaris GENERAL 2016
690 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.22
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
8. Fill recovery bottle to MAX level with recommended
coolant or 50/50 or 60/40 mixture of antifreeze and
distilled water as required for freeze protection in your
area.
Recommended Coolant:
50 / 50 Extended Life Antifreeze
9. Reinstall the recovery bottle cap.
10.If coolant was required, start engine and check for
leaks. Make sure radiator fins are clean to prevent
overheating.
COOLING SYSTEM HOSES
1. Inspect all vehicle hoses for cracks, deterioration,
abrasion or leaks. Replace if necessary.
q
Recovery Bottle
w
Engine Hoses
e
Radiator Hoses
r
To Thermostat Housing
t
To Water Pump
y
To Radiator
2. Inspect all engine hoses for cracks, deterioration,
abrasion or leaks. Replace if necessary.
u
Bypass Hose
i
Water Pump Outlet Hose
o
Oil Cooler Inlet Hose
a
Oil Cooler Outlet Hose
3. Check tightness and condition of all hose spring
clamps. Replace if necessary.
MAINTENANCE

Table of Contents

Related product manuals