Polaris GENERAL 2016 User Manual

10.46
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
15.Install the fasteners holding the upper dash panel to
the vehicle.
16.Install the hood, front and rear fenders, and rocker
panels. Refer to “Exterior Body Component
Installation”page 10.50 procedure.
INTERIOR BODY COMPONENT
INSTALLATION - GENERAL 4
NOTICE
ROPS shown removed for illustration purposes only. It
is not necessary to remove the ROPS to remove the
interior body components.
1. Install the RH and LH main floors in the vehicle and
install the fasteners holding the main floors to the
vehicle. Torque the fasteners to specification.
TORQUE
Floor Fasteners:
3.5 lb-ft (4.7 Nm)
2. Install the brake pedal, accelerator pedal, and
mounting bracket. Refer to “Brake Pedal
Installation”page 9.38 procedure.
3. Install the rear RH and LH floors in the vehicle and
install the fasteners holding the main floors to the
vehicle. Torque the fasteners to specification.
TORQUE
Floor Fasteners:
3.5 lb-ft (4.7 Nm)
BODY / FRAME

Polaris GENERAL 2016 Specifications

General

Brand	Polaris
Model	GENERAL 2016
Category	Offroad Vehicle
Language	English