10
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
10.61
5. With one person pushing the door inward and
upward, have a second person tighten the door hinge
fasteners
w
.
TORQUE
Door Hinge Fasteners: 27 lb-ft (37 Nm)
6. Check the door gap on its leading edge.
NOTICE
If door gap adjustment is needed, make a small
adjustment to the striker pin vertical position and redo
steps 1–4.
7. Verify that the door properly opens, closes, and locks.
DOOR CABLE ADJUSTMENT
To watch a video on this procedure, Scan the provided
QR code or click here.
1. Remove inner door trim by removing it’s fastener
q
.
2. Remove door hinge fastener covers
w
.
BODY / FRAME