4
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.
4.31
6. Select the appropriate vehicle and open the data
display grid. Click on the meter icon next to “TPS
Volts”.
7. Loosen the TPS mounting screws.
8. Rotate the TPS until your display reading is within
specification.
TPS Output Reading (Digital Wrench®):
0.46 ± 0.03 Vdc
9. Retighten the TPS mounting screws and torque to
specification.
TORQUE
TPS Mounting Screws:
18 in-lbs (2 Nm)
10. Verify voltage reading did not change. If voltage
reading is now out of specification, repeat steps 3 -
5.
11. Reinstall items that were removed to access TPS
sensor.
FUEL SYSTEM
To Next Page
Loading...
