2.8
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.
GREASE LUBRICATION POINTS
There are grease fittings at each A-arms pivot point, each front or rear stabilizer bushing, and on the front propshaft
yoke. Apply grease until all traces of water have been purged out at each of these areas.
ITEM RECOMMENDED LUBE METHOD
FREQUENCY
Front Propshaft Yoke(s)
Polaris Premium U-Joint Grease
Grease fittings every 500
miles (800 km).
Grease before long periods
of storage, and after
thoroughly washing or
submerging the vehicle.
A-arm Pivot Bushings
Stabilizer Bar Bushings
MAINTENANCE
To Next Page
Loading...
