Administrator’s Guide for Polycom HDX Systems
5–6 Polycom, Inc.
• Download and install the People+Content IP software application from
the Polycom web site to the computer or computers that the presenter will
use to show content.
You don’t need to change the computer resolutions and you don’t need
special cables or hardware, but each computer must meet these
requirements:
— Operating System: Windows 2000, Windows XP Home, Windows XP
Professional, Windows Vista, and Windows 7
— Minimum computer: 500 MHz Pentium® III (or equivalent); 256 MB
memory
Recommended computer: 1 GHz Pentium III (or equivalent); 512 MB
memory
• Connect the computer or computers to the IP network.
Configuring People on Content™
Polycom People on Content allows you to show yourself on top of content that
you are sharing. The effect is similar to a weather report on television.
This feature is available for Polycom HDX 9000 series, Polycom HDX 8000
series, and Polycom HDX 4000 series systems. For more information about
using this feature, refer to the User’s Guide for Polycom HDX Systems.
If an EagleEye Director is connected to your HDX system, and tracking is
turned on, you can use People on Content or the EagleEye Director, but you
cannot use them at the same time.
If the Polycom HDX system is paired with a Polycom Touch Control,
People+Content IP does not need to be installed. If you connect the PC to the USB
connection on the underside of the Polycom Touch Control, a version of
People+Content IP launches automatically.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
