Polycom HDX 8000 series User Manual

Polycom, Inc. 7–1
7
System Location, Appearance, and
Tones
Configuring Regional Settings
You can configure regional settings for the Polycom HDX Systems and for
Polycom Touch Control Devices. Refer to the following sections, Configuring
Polycom HDX Regional Settings, and Configuring Polycom Touch Control
Regional Settings on page 7-2.
Configuring Polycom HDX Regional Settings
To configure the Polycom HDX regional settings:
1 To set the regional settings, do one of the following:
— In the local interface, go to System > Admin Settings > General
Settings > Location (select if necessary).
— In the web interface, go to Admin Settings > General Settings > Date
and Time.
In order to place ISDN and Analog Phone calls appropriately, leave Always Dial
Area Code disabled if the country you call does not have area codes. Keep Always
Dial Area Code enabled if you want to do 10 digit dialing.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Polycom HDX 8000 series Specifications

General

Microphone	Polycom HDX Microphone Array
Network Protocols	H.323, SIP
Network Interface	10/100/1000 Ethernet
Network Interfaces	10/100/1000 Ethernet
Video Standards	H.263, H.264
Video Resolution	720p, 1080p
Content Sharing	H.239, People+Content
Audio Standards	G.711, G.722, G.728, G.729A
Encryption	H.235 (AES)
Camera	Polycom EagleEye HD camera
Data Standards	H.239
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI, DVI-I
Audio Inputs	3.5mm stereo line-in
Audio Outputs	RCA
Display Outputs	HDMI, DVI-I