Polycom HDX 8000 series User Manual

Administrator’s Guide for Polycom HDX Systems
1–12 Polycom, Inc.
To power off a Polycom HDX 4000 system, do one of the following:
• Press and hold the power button on the side of the monitor.
The monitor and the system power off.
• Press and hold the power button on the front of the system.
The monitor and the system power off.
After turning the power off in this way, wait at least 15 seconds before you
unplug the system from its power source.
Polycom HDX 4000 Systems Indicator Lights
The following figure shows the location of the power switches and indicator
lights.
The indicator light on the front of the Polycom HDX 4000 systems provides
this information:
Monitor Power
System
Monitor Camera
Indicator Light (System) Status
Off System is without power.
Steady blue light System is initializing.
System is awake.
Blinking blue light System received an IR (infrared) signal.
Steady amber light System is asleep.
Alternating blue and amber lights System is in software update mode.
System is in factory restore mode.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Polycom HDX 8000 series Specifications

General

Microphone	Polycom HDX Microphone Array
Network Protocols	H.323, SIP
Network Interface	10/100/1000 Ethernet
Network Interfaces	10/100/1000 Ethernet
Video Standards	H.263, H.264
Video Resolution	720p, 1080p
Content Sharing	H.239, People+Content
Audio Standards	G.711, G.722, G.728, G.729A
Encryption	H.235 (AES)
Camera	Polycom EagleEye HD camera
Data Standards	H.239
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI, DVI-I
Audio Inputs	3.5mm stereo line-in
Audio Outputs	RCA
Display Outputs	HDMI, DVI-I