Control Devices
Polycom, Inc. 10–9
Pairing
To pair the Polycom Touch Control and Polycom HDX system during setup:
>> After selecting a language, enter the HDX system IP address in the
Polycom Touch Control interface and touch Connect.
To pair the Polycom Touch Control and Polycom HDX system after setup:
1 On the Polycom Touch Control Home screen, touch System.
2 Scroll to Device Connection Status and then touch Info next to the
HDX system.
3 Touch View Pairing Settings.
4 Change the HDX system IP address or host name and touch Connect.
After the HDX system and the Polycom Touch Control are paired, the HDX
system web interface and the Polycom Touch Control interface display
information about each other and about their connection status.
Connected A Polycom Touch Control has an active pairing
connection to the Polycom HDX system. A single
Polycom Touch Control can be paired to multiple
Polycom HDX systems, but can be connected to
only one HDX system at a time.
Disconnected The Polycom Touch Control does not have an
active pairing connection to an HDX system, but is
still paired if at least one HDX system that has
previously paired with the Polycom Touch Control
has not unpaired.
State Description
If you do not wish to pair during setup, select Pair Later. If you choose to skip
pairing, many Polycom Touch Control features are not available. You can pair at a
later time.
Do not pair the Polycom HDX system with a Polycom Touch Control if the HDX
system’s security profile requires users to enter a user name and password or if the
Polycom HDX system is configured to display a security banner.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
