Administrator’s Guide for Polycom HDX Systems
Index–4
modem for closed captions 5–13
monitor settings 3–3
monitors
color, sharpness, brightness 3–14
for dual monitor emulation 3–10
multipoint calls 3–12
NAT 2–22, 2–23, 2–24
network, using the setup wizard 1–17
People on Content 5–6
PIP 3–5
Polycom microphones 4–15
Polycom Touch Control 10–6
PRI 2–33
PRI network interface 2–31
remote control 10–1, 10–2
RS-232 serial port 10–5
signal polarity, serial V.35/RS-449/RS-530
2–34
SIP 2–15
SNMP 9–7
StereoSurround 4–19
UC Board 5–8
VCR/DVD 5–2, 5–3
video for recording 3–8
video for recording calls 5–3
Vortex mixer 4–21, 10–5
configuring People on Content 5–7
Confirm Directory Additions Upon Call
Disconnect (setting) 6–7
Confirm Directory Deletions (setting) 6–6
Connect to my LAN (setting) 8–10
connecting
analog phone 2–35
cameras
3–18, 3–21, 3–22
equipment 10–4
connectors
audio input 4–1–4–3
audio output 4–11–4–12
back panel A–1, A–6, A–10
for sending content 5–5
video inputs 3–18, 3–20, 3–21, 3–22, 3–23, 3–24
video outputs 3–1, 3–2, 3–3
Console IP Address (setting) 9–8
Contact Name (setting) 9–8
content
analog vs digital 5–5
display, configuring 3–5, 5–4
displaying People on Content 5–6
maximum frame rate for 1080p 5–1, C–6
maximum frame rate for 720p 5–1, C–5
maximum resolution 5–4
Polycom Touch Control 5–1
sharing through computer 5–4
Content Input (dB meter) 4–17
Content Input Level (setting) 4–16
Content Statistics (screen) 11–4
Content Video Adjustment (setting) 3–9
Content video source
3–26, 3–27, 3–28, 3–29
continuous presence 3–12, 3–40
control panel 10–4
Control Priority (setting) 2–6
control settings for remote access 8–9
Country (setting) 7–2
Country Code (setting) 2–14
Crypto Resync (setting) 2–35
cryptographic equipment, configuring to use
2–35
CSU (channel service unit) 2–32
CTS signal polarity 2–34
Current Percent Filled (setting) 8–34
D
D Channel Location (read-only setting) 2–33
Data Bits (setting) 10–5
data collaboration, See sharing content
data rates (call statistics) 11–4
date and time
displaying 7–5
setting 7–1
Date Format (setting) 7–2
daylight saving time adjustment 7–2
DCD signal polarity 2–34
Default Gateway (IPv4) (setting) 2–3
Default Gateway (IPv6) (setting) 2–4
Delayed DCD Hangup (setting) 2–34
deleting
camera presets 3–37
sample sites 12–1
system files 12–5
destination unreachable messages 2–7
Detect Camera (setting) 3–26, 3–27, 3–28
, 3–29,
10–6
Detect Cameras (setting) 3–31
Diagnostic Mode (setting) 2–38
diagnostic mode, enabling 12–2
diagnostics screens 11–1
dialing
last number dialed 7–6
long distance 7–1
order 2–40
preferred method 2–39
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
