Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
8 - 8
Click on the “Open” button and navigate to the directory that contains the
firmware file to upload as shown in the following figure.
Select the file by double clicking on the desired file name. Once the file has
been selected, the firmware update page will appear as in the following figure.
Click on the update button to begin the firmware transfer to the device. A
window will appear to confirm that the firmware file should be sent to the
selected device. Select Yes to continue the firmware transfer or No to not
update firmware.
To Next Page
Need help?
General
