Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
12 - 40
An example configuration to register a line as extension 1029 to a call server at
172.22.2.203 will look like the figure shown next. Your settings will depend on
the particular values required for your installation.
Using the SoundStructure VoIP Interface with SoundStructure
Studio
As described in earlier sections, you can use SoundStructure Studio to config-
ure the network settings of the SoundStructure VoIP Interface. You can then
use either a provisioning server or the Web Configuration Utility to set up the
VoIP-specific parameters.
In addition to its use in setting up the system, SoundStructure Studio can also
help with understanding how to control the SoundStructure VoIP Interface
and to test the system by making audio calls.
To Next Page
Loading...
