Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
11 - 10
4. Configure the following DNS settings:
Configuring Polycom Touch Control Regional Settings
To configure the Polycom Touch Control Regional settings:
1. From the Home screen, touch Administration.
2. Touch the Location tab.
3. Select a language from the Language drop-down menu.
4. Set the Date and Time information as described in the following table.
Setting Description
Domain Name Displays the domain name currently assigned
to the Polycom Touch Control. If the Polycom
Touch Control does not automatically obtain a
domain name, enter one here.
DNS Servers
Displays the DNS servers currently assigned
to the Polycom Touch Control. If the Polycom
Touch Control does not automatically obtain a
DNS server address, enter up to two DNS
servers here. You can specify IPv4 DNS server
addresses only when the IPv4 address is
entered manually. When the IPv4 address is
obtained automatically, the DNS Server
addresses are also obtained automatically.
Setting Description
Time Zone
Specifies the time difference between GMT
(Greenwich Mean Time) and your location.
To Next Page
Need help?
General
