Polycom SoundStructure C12 User Manual

Integrating The Polycom Touch Control with SoundStructure Systems
11 - 13
4. Touch Select All Updates or touch only the updates that you want to
install.
5. Touch Download and Install Software Updates.
To install Polycom Touch Control updates from a USB storage device:
1. On a computer, open Internet Explorer version 6.x, 7.x, or 8.x.
2. Go to support.polycom.com, and navigate to the page for the Polycom
HDX system that you will use with the Polycom Touch Control.
3. Download the application and platform software update packages to
your hard drive:
—
polycom-venus-HDXCtrl-<version>.zip
— polycom-venus-platform-<version>.zip
4. Using a standard Windows zip utility, extract all contents from the
distribution package or packages to the root directory of a USB storage
device.
When extracting multiple distribution packages to the USB drive, a pop
up message might appear asking if you want to overwrite certain files
that already exist. Select Yes to All.
5. Connect the USB device to the side of the Polycom Touch Control device.
6. From the Home screen, touch Administration and then Updates.
7. Touch Check for Software Updates.
8. Touch Select All Updates or touch only the updates that you want to
install.
9. Touch Download and Install Software Updates.
Using the Polycom Touch Control with SoundStructure
Designing a SoundStructure Project with the Polycom Touch Control
SoundStructure Studio version 1.5.0 or later includes support for creating a
project that uses the Polycom Touch Control.
Adding a Touch Control to a SoundStructure project
SoundStructure Studio supports the Polycom Touch Control and allows one
to be added to a project as shown in the following figure.

Polycom SoundStructure C12 Specifications

General

Brand	Polycom
Model	SoundStructure C12
Category	Conference System
Language	English