Customizing SoundStructure Designs
5 - 7
In addition, groups of virtual channels may be expanded to show the individ-
ual members of the group by clicking the Expand All button or may be
collapsed to only show the virtual channel groups by clicking the Collapse All
button as shown in the following figure.
Editing Virtual Channels
To add or delete additional virtual channels, click the “Edit Channels” button
on the Channels page as highlighted in the following figure. Designs may be
adjusted to add more inputs or outputs up to the limit of the number of phys-
ical inputs and outputs of the hardware that was selected to implement the
design.
Any of the settings for virtual channels can be adjusted by either adjusting the
virtual channels individually or by adjusting the virtual channel group settings.
To Next Page
Loading...
Need help?
General
