Polycom SoundStructure C12 User Manual

Command Protocol Reference Guide
A - 127
sig_gen_type Signal Generator Type
Description
This parameter sets the type of signal produced by the signal generator. The
options are pink noise (pink), white noise (white) a sine wave at a single fre-
quency (tone) and a sine wave swept across a range of frequencies (sweep).
Input Path Parameters
cr_ungated_type Select Processing For Ungated Signal
Argument Argument value
Channel Type Virtual Channel
Value Type List
Read/Write Mode Read/Write
Phys Chans Signal Generator
Virt Chans Mono
Values
pink : Pink Noise (default)
white : White Noise
tone : Sine Wave
sweep : Sine Wave Sweep
Event Source No
Argument Argument value
Channel Type Virtual Channel
Value Type List
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input
Virt Chans Mono, Stereo
Values
conf : Conferencing
sr : Sound Reinforcement
line : Line Input (default)
bypass : Bypass
Event Source No

Polycom SoundStructure C12 Specifications

General

Brand	Polycom
Model	SoundStructure C12
Category	Conference System
Language	English