12 - 1
12
The SoundStructure VoIP Interface
In this chapter you will learn how to create a SoundStructure design with the
SoundStructure VoIP interface and how to integrate that SoundStructure
design into a SIP environment.
This chapter begins with an introduction to the SoundStructure VoIP Interface,
followed by detailed information on setting up the SoundStructure VoIP
Interface.
Introduction
The SoundStructure VoIP Interface is a plug-in card for SoundStructure sys-
tems that is a high-quality SIP-based end-point. This card has been designed
to inter-operate with other compatible equipment including application serv-
ers, media servers, internet-working gateways, voice bridges, and other
end-points. The SoundStructure VoIP Interface uses the industry-leading
Polycom UC Software that is the foundation of the SoundPoint IP and Sound-
Station IP phones.
The SoundStructure system can be controlled by a third-party remote control
system. The control system will send API commands to the SoundStructure
system to cause the SoundStructure system to take the SoundStructure VoIP
To Next Page
Loading...
Need help?
General
