Advanced Applications
13 - 79
microphones in the appropriate zone and adjust volume easily. The “Ampli-
fier” and “Mics” virtual channels will be defined as submixes that can be
adjusted with the “Split” and “Combine” presets.
When an HDX video codec is used with SoundStructure, any command to
mute the HDX will forward a command to mute the virtual channel “Mics”
and if a command is sent to the HDX, the HDX will forward a command to
SoundStructure to adjust the fader level on the channel “Amplifier”.
SoundStructure Studio Steps
Step 1 - Select Inputs
The system should be designed in the combined mode with two HDX table
microphones, two program audio source, two telephone lines, and a Polycom
HDX system.
To Next Page
Loading...
Need help?
General
