Polycom SoundStructure C12 User Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
9 - 36
4. Test logic inputs and events when working offline with SoundStructure
Studio.
5. Use the event enable/disable option if it is necessary to isolate and test indi-
vidual events
6. Select event names that are meaningful to make it easier to interpret the
event list
Logic input pins may be forced to closed or open with
set digital_gpio_state “logic pin” 0 command to close a switch or
set digital_gpio_state “logic pin” 1 to open a switch. The name “logic pin” should
be replaced by the name of the pin you are testing.

Polycom SoundStructure C12 Specifications

General

Brand	Polycom
Model	SoundStructure C12
Category	Conference System
Language	English