Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
12 - 62
in the following figure. The SoundStructure VoIP Interface requires approxi-
mately 1 to 2 minutes to boot. When you perform a software update, the boot
time will increase.
If you don’t have a VoIP interface listed on your wiring page, even though you
have a SoundStructure VoIP Interface plugged in, ensure that your project
includes a SoundStructure VoIP Interface as described in the previous section.
Check the Wiring page Configured Devices area to confirm you have a Sound-
Structure VoIP Interface installed into one or more of your SoundStructure
devices as shown in the Configured Devices section shown next. If a Sound-
Structure VoIP Interface is installed in a multi-SoundStructure device system,
first select the SoundStructure devices that has the SoundStructure VoIP Inter-
face installed to see the VoIP interface info in the device information area.
To Next Page
Loading...
Need help?
General
