The active call is placed on hold and the dialpad is displayed.
2. Enter a number or select a contact.
3. Select Dial.
The phone plays a tone and the call is answered automatically on the contact's phone.
4. After the call is answered, speak your message and select End Call.
5. Select Resume.
Redial a Number
VVX business IP phones automatically keep a record of all calls placed. You can recall the last contact
you called using Redial, if enabled by your system administrator.
Procedure
1. Select Redial.
Answering Audio Calls
When you receive an incoming call on VVX business IP phones, you can choose to answer the call in
various ways, including answering calls automatically, in the Incoming Calls screen, in the Calls screen,
and during a call.
Answer an Incoming Call
When you receive an incoming call, the phone rings and an Incoming Call screen is displayed. In the
Incoming Call screen, you can choose to answer or reject the incoming call.
Note: Your system administrator can enable the screen to flash bright orange when you have an
incoming call. The screen continues to flash until the incoming call is displayed in the Home or
Calls screen. For more information about this feature, contact your system administrator.
Procedure
1. Do one of the following:
• Pick up the handset.
• Press or select Answer.
• Press .
After you answer the incoming call, the call becomes active.
Answer a Call from the Calls Screen
When you don't answer an incoming call within 10 seconds, the Incoming Call screen disappears and the
Calls screen is displayed.
Procedure
1. Select the incoming call, and select Answer.
Audio Calls
Polycom, Inc. 33
To Next Page
Loading...
Need help?
General
