PoolPak MPK series - Optional Field Installed Features; Selection

To Next Page

To Previous Page

PoolPak

MPK Series IOM

Optional Field Installed Features

• Remote air-cooled condenser and associated refrigerant piping

• Remote auxiliary water-cooled condenser or cooling tower and associated water or refrigerant piping

• Building automation system external components and wiring

• Remote space pressure monitoring

• Remote exhaust fan

Selection

PoolPak unit selection software is more than an equipment sizing program. It is designed to accurately calculate the

entire moisture load for your application. The program incorporates the key design parameters, including ASHRAE

ventilation requirement, to help guide the user in meeting the necessary codes. The program also calculates the

ventilation load with the outside air airflow requirement that is specified.

The basic data that would generally need to be entered to calculate a load includes:

• Indoor dry bulb temperature (°F)

• Indoor relative humidity (%)

• Room volume (cu ft)

• Total wet surface area of the pool room (sq ft)

• Total dry surface area of the pool room (sq ft)

• Spectator count

• Pool temperature (°F)

• Pool usage (activity factor: light, medium, and heavy)

• Pool type (swimming pool, wave pool, therapy, and others)

• Outside airflow design (CFM)

Above and other information required for the program can be found in the PoolPak Engineering Library article

“PoolPak Selection Input Data”. Please contact your exclusive PoolPak Sales representative for a selection.

Other manuals for PoolPak MPK series