JETSTREAM
1.0:E29
FIRST STAGE
2808
Assembly:
1. Install the o-rings (30, 32) on
the connection (33). Grease the
o-ring (30) and thread.
2. Fit the connection (33) to the
wheel (34) and screw it into the
valve housing (13) with a 6 mm
Allen wrench. Place the valve
housing in torque wrench to 28
- 30 Nm. (20-22 Ibf.ft).
3. Install the cup filter (28) screw in
the locking screw (27) with an
8.5 mm screwdriver.