CYKLON
1.0:E74
FIRST STAGE
2801, 2808, 2962, 3257,
3580, 3585
6. Remove the valve seat (15) with a
valve seat remover.
7. Remove the o-ring (14) with an
oring remover. Make sure the
sealing surface is not damaged.
8. Remove the valve housing from
the fixture.
9. Remove the blind screw (10 and
13) with a 5 mm and 3 mm Allen
wrench. Remove the o-rings
(9 and 12) with an o-ring remover.
Make sure the sealing surfaces are
not damaged.
3580, 3585
Sealing
surfaces