TRITON
1.0:E102
SECOND STAGE
3755
Assembly
Installing o-rings in the swivel
connection.
Place the fixtures according to fig. 1.
Install an o-ring in the fixture.
Press down the o-ring in the track of the
swivel with tool B.
Remove the fixtures, press out the lower
fixture with the o-ring remover through
the hole in the bottom of the swivel.
Mount the upper o-ring in the track.
Assembly of low pressure valve
1. Place the valve piston in the low
pressure valve guide.
2. Mount the servo valve and press
firmly (until you hear a click).
To Next Page
Loading...
Need help?
General
